• Angebot ausschließlich für Gewerbekunden. | Alle Preise exkl. MWSt.

WARENKORB 0
EUR 0,00

Metabones Nikon G to Micro FourThirds Speed Booster XL 0.64x (Black Matt)

EUR 479,00
exkl. MWSt. | exkl. Versand
SKU: MET-MB_SPNFG-M43-BM2
Nikon G - Micro 4/3 Speed Booster XL 0.64x Konverter - Dieser Konverter ermöglicht es, Objektive mit Nikon G-Anschluss, auf Kameras mit Micro 4/3 zu montieren.
Metabones

Speed Booster XL 0.64x

A new Micro-4/3 mount Speed Booster® adapter designed exclusively for the Panasonic GH4 and other selected Micro Four Thirds cameras (refer to the below camera compatbility table), with a magnification of 0.64x. The Speed Booster XL 0.64x uses an advanced 6-element optical design to achieve extraordinary optical performance at apertures up to an incredible f/0.80, a new record for Micro Four Thirds format. The new Speed Booster XL 0.64x reduces the full-frame crop factor of the Panasonic GH4 from 2.0x to 1.28x, thus effectively transforming these cameras into APS-H format. When the GH4 is used in Cinema 4k video mode the horizontal full frame crop factor is reduced from 2.34x to 1.50x, thus effectively transforming the GH4 into a super-35 format 4k cine camera. In addition, the speed of any attached lens is increased by 11/3 stops, with a maximum output aperture of f/0.80 when an f/1.2 lens is used. For example, a 50mm f/1.2 becomes a 32mm f/0.80, which is the fastest aperture available for full size Micro Four Thirds format.


Key Features

    ▪    Industry's best aperture ring covers a 8-stop range, clearly indicating actual number of f-stops. No more guesswork! (Patent pending).
    ▪    Compatible to both Nikkor G lens &  F lens (include non-AI & AI lens mounts).
    ▪    Increase maximum aperture by 1 1/3 stops.
    ▪    Increase MTF.
    ▪    Makes lens 0.64x wider.
    ▪    Click-less manual G aperture ring.
    ▪    Support Panasonic GH4, GH3, G3, G5, G6, G10, GF3, GF5, GF6, GX1, Olympus E-PL7, Blackmagic Cinema Camera with Micro Four Thirds mount and Blackmagic Pocket Cinema Camera.
    ▪    Optics designed by Caldwell Photographic in the USA (patent pending).
    ▪    The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo Clam ball heads.

Tips: Before mounting your lens to the adaptor, please make sure that the f-stop of aperture ring on the adaptor is turned to "7" (i.e. mounting your lens to the adaptor while only the aperture ring in the adaptor is full closed.).

Remark: This mount is manual aperture control. It does NOT support electronic aperture control. 
 


Compatibility

The Speed Booster XL 0.64x is similar to the Blackmagic-specific 0.64x BMCC Speed Booster (MB_SPNFG-BMCC-BM1), but has been completely re-designed to meet the following requirements:
 
    •    The working distance has increased by 1mm to permit use on the Panasonic GH4 and a number of other Micro Four Thirds cameras without touching the flexible outer cover of the camera’s shutter mechanism.
    •    
    •    The optics are optimized for a standard Micro Four Thirds filter stack thickness of 4mm rather than the 2.4mm found in Blackmagic cameras.
    •    
    •    The image circle diameter has been increased to 21.63mm so that the full 17.3mm x 13mm Four Thirds format is covered.  This has been achieved while maintaining unusually high image quality over the 17.4mm image circle used by the Panasonic GH4 in its Cinema 4k video mode.



List of incompatible lenses

Nikkor 2.1cm f/4
Nikkor AI-S 20mm f/2.8
Nikkor E series lens (the diaphragm blades are not operated by mechanical linkage levers, such as  Nikkor 105mm f/1.4E, PC-E 24mm, 45mm, 85mm T/S, and Nikkor AF-S 16-80mm f/2.8-4E ED DX VR)

Remark: Your PayPal receipt is your order confirmation. There is no separate email confirmation until shipment takes place.

Disclaimer: we are NOT licensed, approved or endorsed by Micro Four Thirds or Nikon.

Mehr Informationen
SKUMET-MB_SPNFG-M43-BM2
PriceEUR 479,00
HerstellerMetabones